How to build a cabinet in 3D and send its parts to the nest
Set one cabinet’s size, shelves and doors, check it in 3D, then add every part to your cut list in one click. The cabinet builder is part of CutBore Pro.
Pick the type and size
- 1Open Add part and choose A cabinet…
- 2Pick Base, Wall or Tall. Each one loads sensible sizes.
- 3Type the overall width, height and depth, including doors and toe kick.
Clip 0:12, muted, loops
Doors, shelves and banding
- 1Set Shelves with − and +. They space themselves evenly.
- 2Choose 1 door or 2 doors. Doors finish 1/16″ in from each side, 1/8″ apart.
- 3Leave Edge banding on for box fronts and all four door edges, or switch it off.
Clip 0:13, muted, loops
Turn and explode the 3D view
- 1Drag to turn the cabinet; scroll or pinch to zoom.
- 2Tap Exploded to pull the parts apart, with their numbers.
- 3Tap a part to find its row. Tap Doors open to see inside.
Clip 0:12, muted, loops
Add to cut list and see the nest
- 1Press Add 10 parts to cut list.
- 2The parts arrive as one group, Base 30″, with material, grain and banding filled in.
- 3The sheet re-nests. Undo takes them all out again; Edit cabinet reopens the panel.
Clip 0:13, muted, loops